MIL-DTL-38449D
3.9.1 Interchangeability. The amplifier shall be functionally interchangeable with in-service,
tube-type single amplifiers.
3.10 Weight. The total weight of the amplifier shall be not greater than 1 pound.
3.11 Identification of product. The unit shall be marked for identification in accordance with
MIL-STD-130. The identification shall be permanent and shall not peel off, crack, or loosen with
age and environmental conditions.
3.12 Finish.
3.12.1 Anodizing. All aluminum alloy parts not otherwise protected by suitable plating or
painting shall be anodized in accordance with MIL-DTL-5541 or MIL-A-8625.
3.12.2 Paint. The unit shall be primed with one coat of epoxy primer in accordance with
MIL-DTL-24441/20 and painted with one coat of black epoxy in accordance with
MIL-DTL-24441/23.
3.13 Workmanship. All details of workmanship shall be of sufficiently high grade to insure
satisfactory operation and service life. Particular attention shall be given to neatness and
thoroughness of soldering, brazing, welding, wire routing that prevents chafing; wiring in
accordance with schematic; freedom from blemishes, defects, burrs, sharp edges, loose chips,
dirt, or other foreign matter; alignment of parts; and tightness of wire routing, screws, bolts,
etcetera.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as
follows:
a. Qualification inspection (see 4.2)
b. Conformance inspection (see 4.3)
4.2 Qualification inspection (see 6.3).
4.2.1 Test samples. The test samples shall consist of four amplifiers of the particular class being
tested. The samples shall be identified with the manufacturer s part number and information as
required by the qualifying activity.
4.2.2 Test report and test samples. When tests are conducted at a location other than the
laboratory of the qualifying activity, the following shall be furnished to that activity in
accordance with contract requirements (see 6.2):
a. Test report A report in accordance with MIL-HDBK-831
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business