MIL-PRF-83755B
3.10 Item identification. The flight check list holder and replaceable parts shall be marked with
the following identification:
a.
Item name.
b.
Manufacturer's identification
c.
Manufacturer's CAGE code.
d.
Manufacturer's part number (PN).
e.
Part identification number (PIN).
3.11 Interchangeability. All parts having the same manufacturer's part number shall be
functionally and dimensionally interchangeable.
3.12 Durability. The flight check list holder shall operate properly after 2,000 scrolling cycles. A
scrolling cycle is defined as full movement of an eight-foot scroll check list from one end to the
other and back.
3.13 Component replacement.
3.13.1 Lens replacement. The lens shall be replaceable within two minutes.
3.13.2 Light replacement. The light bulb shall be replaceable within one minute.
4 VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.2).
b. Conformance inspections (see 4.3).
4.2 First article inspection. When required (see 3.1), first article shall be performed on three
flight checklist holders. First article inspection shall consist of all tests in 4.6 and 4.7.
4.3 Conformance inspection. Conformance inspection shall include the individual tests in 4.6 and
sampling tests in 4.7. Sampling shall be in accordance with ANSI/ASQC Z1.4 commencing at the
normal inspection level, unless modified in the acquisition documents (see 6.2).
4.4 Test conditions. Unless otherwise specified in the acquisition documents (see 6.2), all
inspections shall be performed in accordance with the test conditions specified in the applicable
test method documents or applicable paragraphs in this specification.
4.5 Requirements cross-reference matrix. Table I provides a cross-reference matrix of the
section 3 requirements tested or verified in the paragraphs below.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business