MIL-PRF-83755B
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in
accordance with 4.2.
3.2 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible provided that
the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle cost.
3.3 Materials. All materials shall be suitably treated to resist corrosion due to electrolytic
decomposition and any atmospheric condition that may be encountered during operational use or
storage. The use of toxic chemicals, hazardous substances, or ozone depleting chemicals (ODCs)
shall be avoided, whenever feasible.
3.3.1 Lens. The lens shall be fabricated from a clear, colorless and impact resistant material.
3.3.2 Case. The case shall be made of material sufficient to meet all performance requirements of
this document.
3.4 Interface.
3.4.1 Electrical wiring and terminals. The flight check list holder shall be wired for 28 Volts
direct current (Vdc). There shall be a set of electrical input terminals on each end of the flight
check list holder case. Terminals shall accept MS25036 terminal lugs.
3.4.2 Mounting bracket holes. The mounting bracket shall have two 0.19 inch diameter holes for
mounting screws on 2 ± 0.03 inch centers placed symmetrically about the center of the mounting
bracket. The holes shall be counterbored to a diameter of 0.28 plus 0.03 minus 0.00 inch, and to
a depth of 0.16 inch. The counterbored holes shall be on the face of the mounting bracket that
folds against the end of the flight check list holder case, as shown in figure 1.
3.4.3 Compatibility with cockpit lighting. The color of the emitted light shall be compatible with
the cockpit lighting systems as specified by the procuring activity (see 6.2).
3.5 Components. The flight check list holder shall include a case, lens, and mounting bracket.
The flight check list holder shall be furnished as a completely assembled unit as shown in figure 1.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business