INCH-POUND
MS28055B
13 July 2007 SUPERSEDING MS28055A
8 February 1960
DETAIL SPECIFICATION SHEET
FLANGES, MOUNTING, ATTACHABLE, AIRCRAFT INSTRUMENT
Inactive for new design as of 20 October 1999.
This specification sheet is approved for use by all departments and agencies of the Department of
Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet, MIL-F-6836, "Flanges, Mounting, Attachable, Aircraft Instrument", and figure 1.
REQUIREMENTS:
1. The material shall be in accordance with MIL-F-6836.
2. The finish shall be in accordance with MIL-F-6836.
3. The drills shall be in accordance with AND10387, "Drill Sizes and Drilled Hole
Tolerances Twist".
4. Unless otherwise specified, tolerances in decimals are ±0.005. NOTES:
1. Remove all burrs and sharp edges.
2. Dimensions are in inches.
3. Unless otherwise specified, issues of referenced documents are those in effect at the time of solicitation.
4. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence.
AMSC N/A FSC 1680
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business