MIL-DTL-5755E
3.5 Interchangeability. All parts having the same manufacturer's part number shall be
directly and completely interchangeable with each other with respect to installation and
performance. Changes in manufacturer's part numbers shall be governed by the drawing number
requirements of MIL-STD-31000.
3.6 Weight. The weight of the mirror assembly shall not exceed 0.65 ounce per square inch
of reflecting surface.
3.7 Performance. The mirror shall meet the performance requirements specified in
section 4 when subjected to the applicable tests.
3.8 Identification of product. The mirror assembly shall be marked in accordance with
MIL-STD-130.
3.9 Workmanship. The mirror, including all parts and accessories, shall be constructed
and finished in a thoroughly workmanlike manner. The mirror shall be uniform in quality and
shall be free from irregularities or defects that could adversely affect performance or durability.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.3).
b. Conformance inspection (see 4.4).
4.2 Inspection conditions. Unless otherwise specified herein, the temperature and
pressure at the time of the test shall be ambient room temperature and pressure.
4.3 First article inspection. When first article inspection is required (see 3.1), the
number of mirrors to be submitted for first article testing shall be as specified (see 6.2). This
4.4 Conformance inspection. Conformance inspection shall include the examination of
4.5 Examination. Each mirror shall be examined for compliance with the requirements
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business